CCNP ROUTE – EIGRP Lab with Frame Relay

 

The original lab text is as follows, the video shows a slightly modified version.

Task 1

Configure hostnames and IP addressing on all routers as illustrated in the network topology.

 

Task 2

Configure EIGRP for AS 1 as illustrated in the topology. However, do NOT advertise the 150.x.x.x subnets on any router via EIGRP.

 

Task 3

Configure routers R2 and R4 to as EIGRP stub routers. These routers should advertise their 150.x.x.x/24 subnets as Internal EIGRP routes to R1.

 

Task 4

Configure R1 so that it advertises ONLY a default route to both R2 and R4 as an External EIGRP route. Next, verify your configuration using the appropriate commands. Additionally, also verify that R2 and R4 can ping each others’ 150.x.x.x/24 subnets from their LAN interfaces, as well as the 150.1.1.0/24 subnet on R1s LAN.

Task 5

Configure EIGRP authentication for AS 1 so that all the routers use the password CCNP-2010; however, after 15 minutes, the routers should stop using this password and begin using the password CCNP-2011. The password CCNP-2011 should be used by all routers indefinitely. Verify your configuration using the appropriate commands.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s